工業產品集成供應商      ONE COMPANY.UNLIMITED SOLUTIONS

• The 204 motor requires 4 GPM(15.1 LPM) maximum hydraulic fluid input.

  Recommended for:

  • Pressure Compensating Closed Center Systems

  • Open Center Systems up to 13 GPM (49.2 LPM) using internal needle valve bypass.

  
  

• The 206 motor requires 7 GPM (26.5 LPM) maximum hydraulic fluid input and fits virtually all tractor hydraulic systems.

  Recommended for:

  • Pressure Compensating Closed Center Systems

  • Load Sensing Closed Center Systems

  • Open Center Systems up to 16 GPM (60.6 LPM) using internal needle valve bypass

• The farm industry standard since 1969.

• The 202 and 203 motors require 2 GPM (7.6 LPM) and 3 GPM (11.4 LPM) hydraulic fluid input. Recommended for engineered systems with limited oil flow.

• The 204 motor requires 4 GPM(15.1 LPM) maximum hydraulic fluid input.

  Recommended for:

  • Pressure Compensating Closed Center Systems

  • Open Center Systems up to 13 GPM (49.2 LPM) using internal needle valve bypass.

• The 206 motor requires 7 GPM (26.5 LPM) maximum hydraulic fluid input and fits virtually all tractor hydraulic systems.

  Recommended for:

  • Pressure Compensating Closed Center Systems

  • Load Sensing Closed Center Systems

  • Open Center Systems up to 16 GPM (60.6 LPM) using internal needle valve bypass

• The 210 motor requires 10 GPM (37.9 LPM) maximum hydraulic fluid input.

  Recommended for:

  • Load Sensing Closed Center Systems

  • Open Center Systems up to 17 GPM (64.4 LPM) using internal needle valve bypass.

• The 310 motor requires 16 GPM (60.6 LPM) maximum hydraulic fluid input.

  Recommended for:

• Large Open Center Systems up to 24 GPM (90.9 LPM) using internal needle valve bypass.

• Provides higher pressure and greater volume for applications with large tanks and longer spray booms.

  
  

• The 206 motor requires 7 GPM (26.5 LPM) maximum hydraulic fluid input and fits virtually all tractor hydraulic systems.

  Recommended for:

  • Pressure Compensating Closed Center Systems

  • Load Sensing Closed Center Systems

  • Open Center Systems up to 16 GPM (60.6 LPM) using internal needle valve bypass

• F model equipped with NPT ports and industry standard flanged connections

  
  

• Provides higher pressure and greater volume for applications with large tanks and longer spray booms.

• The 206 motor requires 7 GPM (26.5 LPM) maximum hydraulic fluid input and fits virtually all tractor hydraulic systems.

  Recommended for:

  • Pressure Compensating Closed Center Systems

  • Load Sensing Closed Center Systems

  • Open Center Systems up to 16 GPM (60.6 LPM) using internal needle valve bypass

• FS model constructed of 316 stainless steel with NPT ports and industry standard flanged connections

• Provides higher pressure and greater volume for applications with large tanks and longer spray booms.

• The 206 motor requires 7 GPM (26.5 LPM) maximum hydraulic fluid input and fits virtually all tractor hydraulic systems.

  Recommended for:

• Pressure Compensating Closed Center Systems

• Load Sensing Closed Center Systems

• Open Center Systems up to 16 GPM (60.6 LPM) using internal needle valve bypass

• SP model is self-priming, making it perfect for load and spray applications

• Provides higher pressure and greater volume for applications with large tanks and longer spray booms.

• The 206 motor requires 7 GPM (26.5 LPM) maximum hydraulic fluid input and fits virtually all tractor hydraulic systems.

  Recommended for:

• Pressure Compensating Closed Center Systems

• Load Sensing Closed Center Systems

• Open Center Systems up to 16 GPM (60.6 LPM) using internal needle valve bypass

• Modified impeller design develops higher pressure at lower RPM.

• Durable E-Coat finish provides extra corrosion resistance on all surfaces inside and out.

• Oversized bearings for extended pump life.

• Splined motor to pump shaft connection strenthens the power train while allowing for easy repair and maintenance.

• 4000 PSI high efficiency pressure plated gear motor provides higher output with less oil flow.

• The M16 motor requires 14 GPM (53 LPM) maximum hydraulic fluid input.

  Recommended for:

• Pressure Conpensating Closed Center Systems

• Load Sensing Closed Center Systems

• Open Center Systems up to 14 GPM (53 LPM)

• Modified impeller design develops higher pressure at lower RPM.

• F model equipped with NPT ports and industry standard flanged connections.

• Durable E-Coat finish provides extra corrosion resistance on all surfaces inside and out.

• Oversized bearings for extended pump life.

• Splined motor to pump shaft connection strenthens the power train while allowing for easy repair and maintenance.

• 4000 PSI high efficiency pressure plated gear motor provides higher output with less oil flow.

• The M16 motor requires 14 GPM (53 LPM) maximum hydraulic fluid input.

  Recommended for:

• Pressure Conpensating Closed Center Systems

• Load Sensing Closed Center Systems

• Open Center Systems up to 14 GPM (53 LPM)

• Ideal for spraying, large tank agitation, liquid transfer, and spray - transfer combinations

  
  

• The 210 motor requires 10 GPM (37.9 LPM) maximum hydraulic fluid input.

  Recommended for:

  • Pressure Compensating Closed Center Systems

  • Load Sensing Closed Center Systems

  • Open Center Systems up to 17 GPM (64.4 LPM) using internal needle valve bypass

• The 304 motor requires 11 GPM (41.6 LPM) maximum hydraulic fluid input.

  Recommended for:

  • Pressure Compensating Closed Center Systems

  • Load Sensing Closed Center Systems

  • Open Center Systems up to 20 GPM (75.7 LPM) using internal needle valve bypass

• The 310 motor requires 16 GPM (60.6 LPM) maximum hydraulic fluid input.

  Recommended for:

  • Large Open Center Systems up to 24 GPM (90.9 LPM) using internal needle valve bypass.

• F model equipped with industry standard flanged connections

• Ideal for spraying, large tank agitation, liquid transfer, and spray - transfer combinations

• The 304 motor requires 11 GPM (41.6 LPM) maximum hydraulic fluid input.

  Recommended for:

• Pressure Compensating Closed Center Systems

• Load Sensing Closed Center Systems

• Open Center Systems up to 20 GPM (75.7 LPM) using internal needle valve bypass

• Pressure balanced impeller eliminates thrust load on bearings.

• Standard industry flanged ports for higher flow.

• 

• The M22 motor requires 18 GPM (65.8 LPM) maximum hydraulic fluid input.

  Recommended for:

  • Pressure Conpensating Closed Center Systems

  • Load Sensing Closed Center Systems

  • Open Center Systems up to 18 GPM (65.8 LPM)

  
  

• The M25 motor requires 20 GPM (75.7 LPM) maximum hydraulic fluid input.

  Recommended for:

• Pressure Conpensating Closed Center Systems

• Load Sensing Closed Center Systems

• Open Center Systems up to 20 GPM (75.7 LPM)

  
  

  
  

注意事項：

ACE的離心泵是直的離心機，必須在操作之前要做好準備。準備就是指泵必須完全充滿水將內部空氣排出。

然后確保泵的正確安裝以及正常啟動和避免過早密封失效。

1.泵的安裝應低于水箱以允許水重力填充泵。

2.蝸殼應被定向與排出口朝上　有利于空氣排出。

3.可以將一個小龍頭閥安裝在最頂端管塞孔　每次水箱注水時候可以排空。

4.另一種選擇是，從最上面的管塞孔到噴霧器罐安裝一個1/8“空氣泄放線路。這將空氣連續從泵殼排出。

5.如果泵必須位于液面之上，止回閥的安裝應保持泵的參數要求。

各知名廠商農用拖拉機規格配套用　ACE液壓驅動離心泵

	KUBOTA

Hydraulic Driven Centrifugal Pumps

FMC-75-HYD-204

FMC-75-HYD-206

FMC-HYD-202

FMC-HYD-203

FMC-HYD-204

FMC-HYD-206

FMC-HYD-210

FMC-HYD-310

FMC-150-HYD-206

FMC-150F-HYD-206

FMC-150FS-HYD-206

FMC-150SP-HYD-206

FMC-650-HYD

FMC-650F-HYD

FMC-200-HYD-210

FMC-200-HYD-304

FMC-200-HYD-310

FMC-200F-HYD-304

FMC-750F-HYD-M22

FMC-750F-HYD-M25

FMC-850F-HYD

HYDRAULIC MOTOR

BAC-75-HYD-204N

BAC-75-HYD-206N

BAC-75-HYD-210N

BAC-75-HYD-204R

BAC-75-HYD-206R

BAC-75-HYD-204

BAC-75-HYD-206

BAC-75-HYD-210

BAC-75-HYD-202

BAC-75-HYD-203

BAC-75-HYD-304

BAC-75-HYD-304L

BAC-75-HYD-310

BAC-75-HYD-310L

BAC-75-HYD-304-12SAE

BAC-75-HYD-305

BAC-75-HYD-306

BAC-75-HYD-307

BAC-75-HYD-304N

BAC-75-HYD-310N

Magnetic Clutch Driven Centrifugal Pumps

FMC-MAG

FMC-150-MAG

FMC-650-MAG-D  

FMC-200-MAG

FMC-200-MAG-DX  

FMC-200SS-MAG-DX  

FMC-CW-MAG-D

FMC-CW-150-MAG

FMC-CW-150-MAG-D

FMC-CW-150-MAG-DX3

FMC-CW-200-MAG  

FMC-CW-800-MAG

FMC-CW-800-MAG-D  

FMCSC-205F-HYD-304

FMCSC-205FS-HYD-304

路橋、種子機械、各農用拖拉機、收割機、農用機械、電子廠、金屬加工企業、鋼廠、紡織企業、港口等使用